|
CAS 5 Clean Air Source
Printable
Specification Sheet
Introduction
Cleans
and dries compressed air for aerosol generation and other
applications.
Our
Clean Air Source removes oil or other liquid droplets from
the incoming air using two pre-filters and an oil removal
filter. Any remaining moisture in the air stream is removed
by passing the air through a membrane dryer. It also allows
you to adjust the output pressure using an included gas-regulator
valve. This compressed-air conditioner handles a maximum
flow rate of 141 liters per minute. Its maximum inlet pressure
is 1000 kPa (150 psig).
Specifications
Maximum
flow output |
5
scfm (141.58 lpm) |
Maximum
inlet air pressure |
150
psig (10 bar) |
Maximum
inlet air temperature |
-20°
to +125°F (0° to +50°C) |
Output
Air Quality |
Within
ISO 8573-1, Class 1.7.2 |
Maximum
remaining oil |
•
ppm at +21°C
(+70°F)
with an inlet
concentration of 17 ppm |
Fittings
|
|
Inlet
|
Quick
Disconnect hose coupling |
Outlet
|
¼”
FNPT |
Overall
Dimensions |
|
Length
|
76.2
cm (30 in) |
Width
|
30.5
cm (12 in) |
Height
|
35.5
cm (14 in) |
Weight
|
12.65
lb (5.73 kg) |
Specifications
are subject to change without notice.
Dew point
suppression characteristic of the Clean Air Source Model
5
|
