Aerosol Diluter
Product Overview
Specifications
Part Numbers
Applications
- Pharmaceutical Manufacturers
- Medical Facilities & Cleanrooms
Key Features & Benefits
- Compatible with any 1 cfm particle counter
- Can be plumbed in series for alternate dilution configurations
Aerosol Diluter
Dilutes aerosol to measurable levels for particle counters.
Installed between the aerosol source and a particle counter, diluters minimize pressure drop and aerosol loss while preventing saturation of the particle counter.
- Compatible with any 1 cfm particle counter
- Minimizes pressure drops and aerosol loss
- Available in 10:1 and 100:1 dilution ratio configurations
- Can be plumbed in series for alternate dilution configurations
- Ideal for isolators, mask fittings and installation with low airflows
- Works with any type of aerosol challenge, including PSL, PAO, DOP, and NaCl.
| Product Specifications | |
|---|---|
| Dilution Ratio | D10 – 10:1 | D100 – 100:1 |
| Particle Size of Interest | 0.1, 0.3 or 0.5 micron |
| Air Flow Rate | 1 cfm (28.3 lpm) |
| Pressure Drop | Nominally ≤ 1 in. Water Column (25 mm WC) |
| Electrical | Not required |
| Run Time Meter | Included |
| Material | Stainless Steel |
| Operational Inlet / Outlet | 0.325 in. Tubing ID | 0.25 in. Tubing ID Optional |
| Size | 15.5 cm x 8.3 cm x 55.9 cm (6.5 in. x 3.3 in. x 22.0 in.) |
| Weight | 3.0 kg (7.0 lb) |
| Maintenance | Replace internal bypass filters as necessary. Ultrasonic cleaning of annular orifice. Clean or replace tubing as required. |
| * Note: Flow rate and particle size of interest can be configured to customer requirements | |
| Aerosol Diluter Part Numbers | ||
|---|---|---|
| Aerosol Diluter
D10 |
Aerosol Diluters – 10:1 | TDL0-1211 |
| Aerosol Diluter
D100 |
Aerosol Diluters – 100:1 | TDL0-1212 |